The Drennan Hook Tyer enables youto tie spade end hooks with ease, right down to a size 26 if required. Simpleto use instructions are included. Hold the hook tyer in your left hand with themetal clamp facing upwards. Place your hook, point upwards, into the tyer andpress down on the metal clamp to lock the hook into place. Pass your linearound the clamp. Ensure that the line is held tight at all times and rotatethe tyer away from you ensuring your line lays directly underneath the spade ofthe hook. After one full rotation, alter the angle of the line coming off thespade so as to begin whipping down the hook shank. Remember to keep the linetight at all times. After between ten and fourteen turns wrap the loose end ofthe hook length around the back of the brass peg located on the nose of thetyer. At this point, a bit of saliva will help lubricate your line. Depress theclamp fully and pull gently on your hook length until the largest loop ispulled tight. Unlock the clamp and pull the hook length again until your hookand line becomes free. Trim the loose ends to finish.