Sakuma Metal Attractor Blades (10 Per Pack)

When it comes to targeting predatory flatfish like plaice, flounder, and dabs, visual stimulation and movement are the ultimate catalysts for a bite. Flatfish are notoriously inquisitive creatures, often tracking down a bait by following the physical disturbance and shimmering light reflections left on the seabed. However, when fishing in high-velocity tides, standard plastic beads often lack the weight required to keep your hooklink pinned to the deck, causing your bait to lift and spin unnaturally in mid-water. The Sakuma Metal Attractor Blades provide the definitive mechanical solution.

These premium stamped-metal blades serve a highly tactical dual purpose: they provide an anchor-like weight that stops your long flowing snoods from lifting off the sand in a strong current, while simultaneously spinning to generate an immense visual flash and underwater low-frequency vibration.

At Gerrys Fishing, we consider these a mandatory inclusion for any serious species hunters rig wallet. Supplied complete with specialized spinning clevices, these blades turn standard bottom-fishing rigs into high-attraction flatfish traps that continue working flawlessly when the tidal flow starts to roar.

Technical Specifications

Key Features & Construction

• Hydrodynamic Weighted Mass: Unlike featherweight plastic alternatives, the metal composition of these blades delivers a calculated physical weight directly to the hooklength. This keeps your worm or fish baits firmly resting in the bottom feeding zone where flatfish hunt.

• Frictionless Clevis Rotation: Every packet comes supplied with high-tolerance plastic clevis pins. By mounting the metal blade onto the clevis before sliding it onto your monofilament snood, the blade gains 360-degree free rotation, spinning smoothly in even the slightest tidal drag.

• High-Reflective Plated Finish: Engineered to reflect minimal ambient underwater light into a intense, flickering flash. This replicates the scattering scales of panicked sandeels or juvenile fry, pulling curious flatfish in from wide distances.

• Sonic Vibration Signature: As the blade rotates rapidly in the tidal current, it throws out a continuous thrumming vibration. Flatfish sense these micro-pressure waves through their lateral line system, allowing them to accurately track and strike your bait in murky or heavily colored water.

Where to Use: Recommended Scenarios

• Spring Plaice Drifting and Shore Fishing: The absolute premier home for these blades. Spring plaice feeding over offshore sandbanks or clean beaches are intensely drawn to bright metal movement. Rigging a blade immediately above a cocktail of black lugworm and tipped with squid creates an irresistible visual pathway.

• Fast-Flowing Estuary Flounder Hunting: Flounder love to sit in the slacks and troughs of fast-moving estuary channels. When the tide rips through, these metal blades keep your maddies (ragworms) or peeler crab sections pinned inside the muddy depressions, vibrating aggressively to trigger instant reactive strikes.

• Deep-Water Boat Rigging for Dabs & Turbot: Highly effective when long-lining or fishing multi-hook flapper setups from an anchored boat in deep water. The heavy tidal flows at depth cause these blades to spin like miniature propellers, drawing dabs out of the silt and onto your hooks.

The Gerrys Fishing Verdict

The Sakuma Metal Attractor Blades are an exceptional piece of terminal refinement that solve a major sea angling problem. Many flatfish rigs fail because a strong tide lifts the bait clean out of the search zone, rendering it useless. Sakumas weighted metal design completely counters this lift, while providing a levels of flash and low-frequency vibration that plastic beads simply cannot match. They are exceptionally tough, spin at the slightest movement, and consistently pick out the larger, quality fish during a busy session.

Gerrys Pro Tip: To build an absolute tournament-winning flatfish rig using these components, always construct a bearing sleeve using micro-beads on either side of the clevis. First, slide a tight-fitting silicone float stop onto your monofilament snood to act as a depth anchor. Follow this with a small, hard 2mm plastic bead, then slide on the Sakuma clevis (with the metal blade already attached facing downward toward the hook), and finish with another 2mm hard bead and a final silicone stop. The hard plastic beads act exactly like mechanical ball bearings, preventing the spinning clevis from rubbing against the soft silicone stops. This creates an incredibly smooth, low-friction setup that spins at maximum speed without ever binding up or twisting your snood line!

Frequently Asked Questions (FAQs)

How far away from the hook should I position the metal attractor blade?

For general flatfish tactics, the blade performs best when locked between 2 to 6 inches (5cm to 15cm) directly above the hook eye. This ensures that when a plaice or flounder approaches the spinning flash of the metal blade, your baited hook is sitting directly in its immediate field of vision, forcing a quick, aggressive strike.

Will these metal blades rust or tarnish after exposure to saltwater?

No. Sakuma manufactures these blades using a high-grade, marine-treated alloy specifically designed to resist the corrosive effects of saltwater environments. To keep them spinning at absolute peak factory efficiency, we always recommend giving your rigs a brief rinse in fresh water and letting them dry completely before packing them back into your rig wallets.

Do these metal blades cause the rig to tangle during long-range casting?

If rigged on a standard, loose flapper snood, a heavy metal blade can occasionally cause the line to helicopter mid-air during a massive power cast. To eliminate this completely, always fish these blades on a long flowing trace or streamlined pulley rig clipped down behind an impact lead or bait clip. This keeps the blade tucked tight and immobile against the main rig body during flight, ensuring absolute aerodynamic efficiency and a completely tangle-free delivery.