Matrix XTR No8+ Section Protector Safeguard Your Carbon Investment

Pole sections are the most vulnerable parts of your setup, especially when you are shipping back rapidly over rough terrain or clamping the pole tightly under your arm. The Matrix XTR No8+ Section Protector is a purpose-built, short carbon sleeve engineered to absorb that wear and tear, shielding your expensive main pole sections from accidental crushing, chips, and costly splits.

Crafted from high-grade, lightweight carbon fiber, this 240mm protector adds virtually zero noticeable weight to your setup, maintaining the pristine balance and recovery of your pole. It comes fitted with protective, high-density EVA foam ends on both sides. These inserts act as a barrier to block mud, grit, and abrasive gravel from entering the female joints, preventing internal scoring when you pack down.

Designed specifically to fit the critical mid-to-butt sections of your Matrix XTR pole, this short protector gives you total peace of mind whether you are fishing short on the inside line or shipping out to maximum distance.

Key Technical Specifications

• Material: High-grade, ultra-durable carbon fiber construction

• End Protection: Fitted EVA foam ends to seal out dirt, mud, and abrasive debris

• Compatibility: Universally fits the 13m, 14.5m, and 16m Matrix XTR pole sections

• Length: 240mm

• Weight: An ultra-lightweight 47g

Where & When to Use

• Rough Terrain Banks: Absolute essential when shipping back over high banks, brambles, concrete platforms, or gravel paths where a misplaced section can fracture the carbon.

• Active Slapping or Short-Line Fishing: Ideal when holding the pole under your elbow for hours on high-catch-rate commercial venues, distributing the clamping pressure safely.

• High-Wind Sessions: Provides crucial reinforcement to the section ends when the pole is subject to severe twisting and lateral stress in heavy crosswinds.

Pro Tip from the Gerrys Fishing Team

The No8+ Section Protector isnt just for shipping backits a game-changer for short-range commercial fishing. If you find yourself targeting the margins or fishing at 5 to 8 meters where you hold the pole under your arm for hours, strip back to this protector. It absorbs all the elbow-clamping pressure that can easily cause a standard section to hair-line split under heavy hookholds or when high-stopping large carp.

Frequently Asked Questions (FAQs)

Will using this protector alter the balance or action of my Matrix XTR pole?

At a mere 47g, it is practically unnoticeable in hand. Because it is manufactured from high-quality carbon fiber rather than cheap, heavy fiberglass, it blends seamlessly into the rig without adding droop or slowing down the striking response of your pole.

Does this protector fit other brands of poles?

The Matrix XTR No8+ Section Protector is explicitly tapered and sized to fit the internal and external profiles of the 13m, 14.5m, and 16m sections of the Matrix XTR pole range. We do not recommend using it on other pole families, as even a fraction of a millimeter difference in taper can cause a loose fit or unwanted joint wear.

Can the EVA ends be replaced if they get worn?

The EVA ends are securely bonded into the carbon sleeve to prevent them from slipping out during heavy use. With normal caresuch as occasionally wiping away dried mud or slimethe durable EVA inserts will last the entire lifespan of the protector.